Atag KA2411L User Manual download pdf (Page 22)

FastFreeze function

This function stops automatically after 52

hours.

1. To switch on the function:

a. Press Functions button until the

corresponding icon appears.

The FastFreeze indicator flashes.

b. Press OK to confirm.

The FastFreeze indicator is shown.

2. To switch off the function before its

automatic end:

a. Press Functions button until the

FastFreeze indicator flashes.

b.

Press OK to confirm.

The function switches off by

selecting a different freezer set

temperature.

High temperature alarm

An increase in the temperature in the

freezer compartment (for example due to

an earlier power failure or door is open) is

indicated by:

• flashing the alarm and freezer

temperature indicators;

• sounding of buzzer.

To reset the alarm press any button.

The buzzer switches off.

The freezer temperature indicator shows

the highest temperature reached for a few

seconds. Then show again the set

temperature.

The alarm indicator continues to flash until

the normal conditions are restored.

When the alarm has returned

the alarm indicator goes off.

Door open alarm for the wine

cellar compartment

An acoustic alarm will sound if the door is

left open for a few minutes. The door open

alarm conditions are indicated by:

• flashing Alarm indicator

• acoustic buzzer

When normal conditions are restored (door

closed), the alarm will stop.

During the alarm, the buzzer can be

switched off by pressing any button.

Fan function

1.

To activate the function press the

Functions until the corresponding icon

appears.

The Fan indicator flashes.

2.

Press the OK to confirm.

The Fan indicator is shown.

3.

To switch off the function, repeat the

steps until the Fan indicator goes off.

The activation of the Fan

function increases the energy

consumption.

If the function is activated

automatically the Fan indicator is

not shown (refer to "Daily use ").

DAILY USE

Cleaning the interior

Before using the appliance for the first time,

wash the interior and all internal

accessories with lukewarm water and some

neutral soap so as to remove the typical

smell of a brand-new product, then dry

thoroughly.

CAUTION! Do not use

detergents or abrasive powders,

as these will damage the finish.

If “dEMo” appears on the

Display, the appliance is in

demonstration mode: refer to

“WHAT TO DO IF...” paragraph.

22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 63 64

Comments to this Manuals

No comments