Atag KA2411L User Manual download pdf (Page 11)

Periodic cleaning

CAUTION! Do not pull, move or

damage any pipes and/or

cables inside the cabinet.

CAUTION! Take care of not to

damage the cooling system.

CAUTION! When moving the

cabinet, lift it by the front edge

to avoid scratching the floor.

The equipment has to be cleaned regularly:

1.

Clean the inside and accessories with

lukewarm water and some neutral soap.

2.

Regularly check the door seals and

wipe clean to ensure they are clean and

free from debris.

3.

Rinse and dry thoroughly.

4.

If accessible, clean the condenser and

the compressor at the back of the

appliance with a brush.

This operation will improve the

performance of the appliance and save

electricity consumption.

Defrosting of the refrigerator

Frost is automatically eliminated from the

evaporator of the refrigerator compartment

every time the motor compressor stops,

during normal use. The defrost water drains

out through a trough into a special

container at the back of the appliance, over

the motor compressor, where it evaporates.

It is important to periodically clean the

defrost water drain hole in the middle of the

refrigerator compartment channel to

prevent the water overflowing and dripping

onto the food inside.

Defrosting the freezer

The freezer compartment is frost free. This

means that there is no build up of frost

when it is in operation, neither on the

internal walls nor on the foods.

The absence of frost is due to the

continuous circulation of cold air inside the

compartment, driven by an automatically

controlled fan.

Periods of non-operation

When the appliance is not in use for long

periods, take the following precautions:

1. Disconnect the appliance from

electricity supply.

2. Remove all food.

3. Clean the appliance and all accessories.

4. Leave the door/doors open to prevent

unpleasant smells.

WARNING! If the cabinet will be

kept on, ask somebody to

check it once in a while to

prevent the food inside from

spoiling in case of a power

failure.

TROUBLESHOOTING

WARNING! Refer to Safety

chapters.

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Comments to this Manuals

No comments