Atag KA2411L User Manual download pdf (Page 6)

The display switches off.

2. Disconnect the mains plug from the

power socket.

Switching on the wine cellar

1. Press the Functions button until the

corresponding icon appears.

The wine cellar OFF indicator flashes.

2. Press OK to confirm.

To select a different set temperature

refer to "Temperature regulation".

The wine cellar OFF indicator goes off.

Switching off the wine cellar

1.

Press the Functions button until the

corresponding icon appears.

The wine cellar OFF and the wine cellar

compartment indicators flash. The wine

cellar temperature indicator shows dashes.

2.

Press OK to confirm.

The wine cellar OFF indicator is shown.

Temperature regulation

Set the temperature of the wine cellar and

of the freezer by pressing the temperature

regulators.

Default temperature settings:

• +10°C for the wine cellar

• -18°C for the freezer

The set temperature will be reached within

24 hours.

After a power failure the set temperature

remains stored.

DrinksChill function

The DrinksChill mode is to be used to set

an acoustic alarm at the preferred time,

useful, for example, when you want to

rapidly chill a bottle of wine for a certain

length of time.

1. To switch on the function press

Functions button until the

corresponding icon appears.

The DrinksChill indicator flashes.

The timer shows the set value (30 minutes)

for a few seconds.

2. Press the temperature colder button or

temperature warmer button to change

the Timer set value from 1 to 90

minutes.

3. Press OK to confirm.

DrinkChill indicator is shown. The Timer

starts to flash (min).

At the end of the countdown the DrinksChill

indicator flashes and an audible alarm

sounds.

4. Press OK to switch off the sound and

terminate the function.

It is possible to deactivate

the function at any time

during the countdown by

pressing Functions until

DrinksChill indicator flashes

and then pressing OK to

confirm.

It is possible to change the

time during the countdown

and at the end by pressing

the temperature colder

button and the temperature

warmer button.

ChildLock function

To lock any possible operation through the

buttons select the ChildLock function.

1. Press Functions button until the

corresponding icon appears.

The ChildLock indicator flashes.

2. Press OK to confirm.

The ChildLock indicator is shown.

3. To switch off the function press

Functionsbutton until ChildLock

indicator flashes, then press OKto

confirm.

The ChildLock indicator goes off.

FastFreeze function

This function stops automatically after 52

hours.

1. To switch on the function:

a. Press Functions button until the

corresponding icon appears.

The FastFreeze indicator flashes.

b. Press OK to confirm.

6

1 2 3 4 5 6 7 8 9 10 11 ... 47 48

Comments to this Manuals

No comments