Atag VA4511AT User Manual download pdf (Page 66)

Always remember that when performing

the following operations:

– selecting a washing programme,

– setting the water softener level,

– activating/deactivating the audible

signals,

the appliance MUST be in setting mode.

Press the On/Off button; if a programme but-

ton light comes on the last performed or se-

lected programme is still set. In this case, to

return to setting mode, the programme has

to be cancelled.

To cancel a set programme or a

programme in progress

Simultaneously press and hold the two func-

tion buttons B and C until all the programme

button lights come on. The programme has

been cancelled and the machine is now in

setting mode.

Audible signals

Audible signals have been introduced to help

indicate which operations the dishwasher is

performing:

– setting of the water softener,

– end of the washing programme,

– intervention of an alarm due to malfunction

of the machine.

Factory setting: audible signals activated

It is possible to deactivate the audible

signals.

Deactivation/activation of the audible

signals

1. Press the on/off button. The dishwasher

must be in setting mode.

2. Simultaneously press and hold function

buttons B and C until the lights of function

buttons A, B and C start flashing.

3. Press function button C, the lights of

function buttons A and B go off while the

light of function button C continues to

flash. The digital display shows the cur-

rent level.

Audible signals deactivated

Audible signals activated

4. To change the setting, press function

button C again; the digital display shows

the new setting.

5. To memorize the operation, switch off the

dishwasher.

First use

Before using your dishwasher for the first

time:

• Ensure that the electrical and water con-

nections comply with the installation in-

structions

• Remove all packaging from inside the ap-

pliance

• Set the water softener level

• Pour 1 litre of water into the salt container

and then fill with dishwasher salt

• Fill the rinse aid dispenser

If you want to use combi detergent

tablets such as: '3 in 1', '4 in 1', '5 in

1' etc. follow the instructions given

in 'Use of detergent'.

Setting the water softener

The dishwasher is equipped with a water

softener designed to remove minerals and

salts from the water supply, which would

have a detrimental or adverse effect on the

operation of the appliance.

The higher the content of these minerals and

salts, the harder your water is. Water hard-

ness is measured in equivalent scales, Ger-

man degrees (dH°), French degrees (°TH)

and mmol/l (millimol per litre - international

unit for the hardness of water).

The softener should be adjusted according

to the hardness of the water in your area.

Your local Water Authority can advise you on

the hardness of the water in your area.

The water softener must be set in two

ways: manually, using the water hard-

ness dial and electronically.

66

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 83 84

Comments to this Manuals

No comments