Atag VA4511AT User Manual download pdf (Page 72)

Using no more than the correct amount

of detergent contributes to reducing pol-

lution.

Fill with detergent

1. Open the lid.

2. Fill the detergent dispenser (1) with de-

tergent. The marking indicates the dosing

levels:

20 = approximately 20 g of detergent

30 = approximately 30 g of detergent.

1

2

3. All programmes with prewash need an

additional detergent dose (5/10 g) that

must be placed in the prewash detergent

chamber (2).

This detergent will be used during the

prewash phase.

When using detergent tablets; place the

tablet in compartment (1)

4. Close the lid and press until it locks in

place.

Detergent tablets from different manu-

facturers dissolve at different rates. For

this reason, some detergent tablets do

not attain their full cleaning power during

short washing programmes. Therefore,

please use long washing programmes

when using detergent tablets, to ensure

the complete removal of detergent re-

siduals.

Use of combi detergent tablets

These products are detergents with a com-

bined cleaning, rinsing and salt functions.

They can also contain other different agents

depending on which kind of tablets you

choose ('3 in 1', '4 in 1', '5 in 1' etc.).

1. Check whether these detergents are suit-

able for your water hardness. See the

manufacturers instructions.

The refilling of the salt container and the

rinse aid dispenser are no longer neces-

sary. In this case the rinse aid indicator

light will always remain on when the ma-

chine is switched on.

2. Select the lowest setting for water hard-

ness and rinse aid dosage.

If the drying results are not satisfactory

we recommend that you:

1. Fill up the rinse aid dispenser with rinse

aid.

2. Set the rinse aid dosage to position 2.

If you decide to turn back to the use of

standard detergent system we advise

that you:

1. Fill up the dispensers for salt and rinse aid

again.

72

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 83 84

Comments to this Manuals

No comments