Atag VA5511ATUU/A06 User Manual download pdf (Page 47)

5. Before the installation of the hinge sup-

port, screw bottom unit of the hinge into

the holes provided in the hinge support.

6. Place the hinge supports evenly spaced

on the floor of the recess. Align flush with

the front of the floor of the recess. Fasten

with the 6 wood screws supplied.

7. Use the supplied drilling template. Mark

out and drill two holes a (ø 35 mm, 11

mm deep) for the hinges at the bottom

of the hinged door. To do this, align the

drilling template with the bottom edge of

the hinged door.

8. Mark out and drill 8 holes b for the two

guides (ø 2 mm, 12 mm deep) at the top

of the hinged door. To do this, align the

drilling template with the top edge of the

hinged door.

9. Screw the hinges using 4 countersunk-

head wood screws. Screw the guides to

the hinged door using 8 Spax screws (4

x 20 pozidrive).

47

1 2 ... 42 43 44 45 46 47 48 49 50 51 52

Comments to this Manuals

No comments