Atag VA5511ATUU/A06 User Manual download pdf (Page 32)

Water hardness

Adjusting the water

hardness setting

Use of

salt

°dH °TH mmol/l

51 - 70 91 - 125 9,1 - 12,5 level 10 yes

43 - 50 76 - 90 7,6 - 9,0 level 9 yes

37 - 42 65 - 75 6,5 - 7,5 level 8 yes

29 - 36 51 - 64 5,1 - 6,4 level 7 yes

23 - 28 40 - 50 4,0 - 5,0 level 6 yes

19 - 22 33 - 39 3,3 - 3,9 level 5 yes

15 - 18 26 - 32 2,6 - 3,2 level 4 yes

11 - 14 19 - 25 1,9 - 2,5 level 3 yes

4 - 10 7 - 18 0,7 - 1,8 level 2 yes

< 4 < 7 < 0,7 level 1 no

Setting electronically

The dishwasher is factory set at level 5.

1. Press the On/Off button. The dishwasher

must be in setting mode.

2. Simultaneously press and hold function

buttons B and C , until the lights of func-

tion buttons A , B and C start flashing.

3. Press function button A , the lights of

function buttons B and C go off while the

light of function button A continues to

flash. The current level shows on the dig-

ital display and a sequence of intermittent

audible signals are heard.

Examples:

displayed, 5 intermittent audible sig-

nals, pause,

displayed, 5 intermittent

audible signals, pause, etc... = level 5

displayed, 10 intermittent audible

signals, pause,

displayed, 10 inter-

mittent audible signals, pause, etc... =

level 10

4. To change the level, press function but-

ton A . Each time the button is pressed

the level changes. (For the selection of the

new level see the chart)..

Examples: If the current level is 5, by

pressing function button A once, level 6

is selected. if the current level is 10, by

pressing function button A once, level 1

is selected.

5. To memorize the operation, switch off the

dishwasher by pressing the On/Off but-

ton.

Use of dishwasher salt

Warning!

Only use salt specifically designed for use in

dishwashers. All other types of salt not spe-

cifically designed for use in a dishwasher, es-

pecially table salt, will damage the water soft-

ener. Only fill with salt just before starting one

of the complete washing programmes. This

will prevent any grains of salt or salty water,

which may have been spilt, remaining on the

bottom of the machine for any period of time,

which may cause corrosion.

To fill:

1. Open the door, remove the lower basket

and unscrew the cap of the salt container

by turning it anticlockwise.

2. Pour 1 litre of water into the container

(this is necessary only before filling

with salt for the first time) .

3. Pour in the salt until the container is full.

32

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 51 52

Comments to this Manuals

No comments