Atag VA63211RF/A01 User Manual download pdf (Page 14)

Make sure that there is detergent in the

detergent dispenser before you start a new

programme.

End of the programme

When the programme is completed the

display shows 0:00. The phase indicators

are off.

All buttons are inactive except for the on/off

button.

1. Press the on/off button or wait for the

AUTO OFF function to automatically

deactivate the appliance.

If you open the door before the

activation of AUTO OFF, the appliance

is automatically deactivated.

2. Close the water tap.

HINTS AND TIPS

General

The following hints will ensure optimal

cleaning and drying results in daily use and

also help to protect the environment.

• Remove larger residues of food from the

dishes into the waste bin.

• Do not pre-rinse dishes by hand. When

needed, use the prewash programme (if

available) or select a programme with a

prewash phase.

• Always use the whole space of the

baskets.

• When loading the appliance, make sure

that the dishes can be completely

reached and washed by the water

released from the spray arm nozzles.

Make sure that items do not touch or

cover each other.

• You can use dishwasher detergent, rinse

aid and salt separately or you can use

the multi-tablets (e.g. ''3in1'', ''4in1'',

''All in 1''). Follow the instructions written

on the packaging.

• Select the programme according to the

type of load and degree of soil. With the

ECO programme you have the most

efficient use of water and energy

consumption for crockery and cutlery

with normal soil.

Using salt, rinse aid and

detergent

• Only use salt, rinse aid and detergent for

dishwasher. Other products can cause

damage to the appliance.

• Multi-tablets are usually suitable in areas

with a water hardness up to 21 °dH. In

areas exceeding this limit, rinse aid and

salt must be used in addition to the

multi-tablets. However, in areas with

hard and very hard water we

recommend to use solo-detergent

(powder, gel, tablets without additional

functions), rinse aid and salt separately

for optimal cleaning and drying results.

• If you use multi-tablets you can select

the Multitab option (if available). This

option increases the cleaning and drying

results with the use of multi-tablets.

• Detergent tablets do not fully dissolve

with short programmes. To prevent

detergent residues on the tableware, we

recommend that you use the tablets with

long programmes.

• Do not use more than the correct

quantity of detergent. Refer to the

instructions on the detergent packaging.

What to do if you want to stop

using multi-tablets

Before you start to use separately

detergent, salt and rinse aid do the

following procedure.

1. Set the highest level of the water

softener.

2. Make sure that the salt and rinse aid

containers are full.

3. Start the shortest programme with a

rinsing phase. Do not add detergent

and do not load the baskets.

4. When the programme is completed,

adjust the water softener according to

the water hardness in your area.

5. Adjust the released quantity of rinse aid.

14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

Comments to this Manuals

No comments