Atag VA61313KT User Manual download pdf (Page 9)

During the drying phase, the

door opens automatically and

remains ajar.

CAUTION! Do not try to close

the appliance door within 2

minutes after automatic

opening. This can cause

damage to the appliance.

AirDry is automatically activated with all

programmes excluding .

CAUTION! If children have

access to the appliance, it is

advised to deactivate AirDry as

opening the door may pose a

danger.

How to deactivate AirDry

Make sure the appliance is in user mode.

1. Press the programme button twice.

• The indicators and are

on.

• The indicator flashes.

2. Wait until the indicators

and

are off. The indicator still flashes.

• The indicator shows the current

setting: off = AirDry is

deactivated.

3. Press the programme button to

change the setting.

• on = AirDry is activated.

4. Press on/off to confirm the setting.

BEFORE FIRST USE

1. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If not,

adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the baskets.

After starting a programme, it may take up

to 5 minutes for the appliance to recharge

the resin in the water softener. It seems

that the appliance is not working. The

washing phase starts only after this

procedure is completed. The procedure is

repeated periodically.

The salt container

CAUTION! Use rough salt

designed for dishwashers only.

Fine salt increases the risk of

corrosion.

The salt is used to recharge the resin in

the water softener and to assure good

washing results in daily use.

How to fill the salt container

1. Turn the cap of the salt container

counterclockwise and remove it.

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comments to this Manuals

No comments