Atag VA61211KT User Manual download pdf (Page 9)

indicator starts to flash and the

indicator comes on with fixed light.

2. Press immediately the programme

button.

• The indicator comes on with

fixed light.

• The indicator starts to flash.

3. Wait until the indicator goes off.

The indicator continues to flash.

• The end indicator indicates the

current setting: End indicator off =

Acoustic signal off.

4. Press the programme button to change

the setting.

• End indicator on = Acoustic signal

on.

5. Press the on/off button confirm the

setting.

BEFORE FIRST USE

1. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If not,

adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the baskets.

When you start a programme, the

appliance can take up to 5 minutes to

recharge the resin in the water softener. It

seems that the appliance is not working.

The washing phase starts only after this

procedure is completed. The procedure will

be repeated periodically.

The salt container

CAUTION! Only use salt

specifically designed for

dishwashers.

The salt is used to recharge the resin in the

water softener and to assure good washing

results in the daily use.

How to fill the salt container

1. Turn the cap of the salt container

counterclockwise and remove it.

2. Put 1 litre of water in the salt container

(Only for the first time).

3. Fill the salt container with dishwasher

salt.

4. Remove the salt around the opening of

the salt container.

5.

Turn the cap of the salt container

clockwise to close the salt container.

Water and salt can come out

from the salt container when

you fill it. Risk of corrosion. To

prevent it, after you fill the salt

container, start a programme.

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 51 52

Comments to this Manuals

No comments