Atag VA61211KT User Manual download pdf (Page 8)

your area. It is important to set the right

level of the water softener to assure good

washing results.

Water hardness

German de-

grees (°dH)

French de-

grees (°fH)

mmol/l Clarke de-

grees

Water softener

level

47 - 50 84 - 90 8.4 - 9.0 58 - 63 10

43 - 46 76 - 83 7.6 - 8.3 53 - 57 9

37 - 42 65 - 75 6.5 - 7.5 46 - 52 8

29 - 36 51 - 64 5.1 - 6.4 36 - 45 7

23 - 28 40 - 50 4.0 - 5.0 28 - 35 6

19 - 22 33 - 39 3.3 - 3.9 23 - 27

5

1)

15 - 18 26 - 32 2.6 - 3.2 18 - 22 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 2

<4 <7 <0.7 < 5

1

2)

1)

Factory setting.

2)

Do not use salt at this level.

How to set the water softener

level

The appliance must be in programme

selection mode.

1. To enter the user mode, press and hold

the programme button until the

indicator

starts to flash and the

indicator comes on with fixed light.

2. Wait until the indicator goes off and

the indicator starts to flash. The

indicator

continues to flash. The

intermittent flashing of the indicator

refers to the current set level.

• E.g. 5 flashes + pause + 5 flashes =

level5.

3.

Press programme button repeatedly to

change the setting. Each time you press

programme button the level number

increases. After level 10 you will start

again from level 1.

4. Press the on/off button to confirm the

setting.

Acoustic signals

Acoustic signals sound when a malfunction

of the appliance occurs. It is not possible to

deactivate these acoustic signals.

There is also an acoustic signal that sounds

when the programme is completed. By

default this acoustic signal is deactivated

but it is possible to activate it.

How to activate the acoustic

signal for the end of programme

The appliance must be in programme

selection mode.

1.

To enter the user mode, press and hold

the programme button until the

8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 51 52

Comments to this Manuals

No comments