Atag VA5511BT/A03 User Manual download pdf (Page 21)

Manual adjustment

Turn the water hardness dial to the position

1 or 2.

Electronic adjustment

1. Press the on/off button to activate the

appliance. Make sure that the appliance

is in setting mode, refer to ‘SETTING

AND STARTING A PROGRAMME’.

2. Press and hold buttons (4) and (5) at the

same time until the indicators of buttons

(3), (4) and (5) flash.

3. Press button (3).

• The indicators of buttons (4) and (5)

go off.

• The indicator of button (3) continues

to flash.

• The acoustic signals operate, e.g. five

intermittent acoustic signals = level 5.

• The display shows the setting of the

water softener, e.g.

= level 5.

4. Press button (3) again and again to

change the setting.

5. Deactivate the appliance to confirm the

setting.

Filling the salt container

1. Turn the cap counterclockwise and

open the salt container.

2. Put 1 litre of water in the salt container

(only for the first time).

3. Fill the salt container with dishwasher

salt.

4. Remove the salt around the opening of

the salt container.

5. Turn the cap clockwise to close the

salt container.

Caution! Water and salt can come out

from the salt container when you fill it.

Risk of corrosion. To prevent it, after

you fill the salt container, start a pro-

gramme.

21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 55 56

Comments to this Manuals

No comments