Atag VA61313MT User Manual

VA61313MTUser ManualDishwasher

During the drying phase, thedoor opens automatically andremains ajar.CAUTION! Do not try to closethe appliance door within 2minutes after automaticope

BEFORE FIRST USE1. Make sure that the current level ofthe water softener agrees with thehardness of the water supply. If not,adjust the level of the w

MAX1234+-ABDCCAUTION! Only use rinse aidspecifically designed fordishwashers.1. Press the release button (D) to openthe lid (C).2. Pour the rinse aid

• 5 minutes after the completion of theprogramme.• After 5 minutes if the programme hasnot started.Starting a programme1. Keep the appliance door ajar

HINTS AND TIPSGeneralThe following hints will ensure optimalcleaning and drying results in daily useand also help to protect the environment.• Remove

• Put light items in the upper basket.Make sure that the items do not move.• Make sure that the spray arm canmove freely before you start aprogramme.B

5. Make sure that there are no residuesof food or soil in or around the edge ofthe sump.6. Put back in place the flat filter (A).Make sure that it is

TROUBLESHOOTINGIf the appliance does not start or it stopsduring operation, first check if you cansolve the problem by yourself with thehelp of the in

Problem and alarm code Possible cause and solutionThe remaining time in thedisplay increases and skipsnearly to the end of programtime.• This is not a

Problem Possible cause and solutionPoor drying results. • Tableware has been left for too long inside a closed ap‐pliance.• There is no rinse aid or t

CONTENTSSafety information 2Safety instructions 3Product description 5Control panel 6Programmes 6Settings 7Options 10Before first use 11Daily use 12Hi

Problem Possible cause and solutionLimescale deposits on the ta‐bleware, on the tub and on theinside of the door.• The level of salt is low, check the

21

22

23

156919280-A-232017When contacting the service department, have the complete type number to hand.You will find the addresses and phone numbers of the s

– by clients in hotels, motels, bed & breakfast and otherresidential type environments.• Do not change the specification of this appliance.• The o

• Do not use multi-plug adapters andextension cables.• Make sure not to cause damage to themains plug and to the mains cable.Should the mains cable ne

PRODUCT DESCRIPTION437 9 8 105611 121Upper spray arm2Lower spray arm3Filters4Rating plate5Salt container6Air vent7Rinse aid dispenser8Deterg

CONTROL PANEL1 24351On/off button2Display3Delay button4Programme buttons5IndicatorsIndicatorsIndicator DescriptionExtra Dry indicator.Rinse aid indica

Programme Degree of soilType of loadProgramme phases Options 4)• All • Prewash 1) With this programme you have the most efficient use of water and en

How to set the programmeselection modeThe appliance is in programme selectionmode when the programme indicator flashes and the display shows theprogra

How to set the water softenerlevelMake sure the appliance is in user mode.1. Press .• The indicators , and are off.• The indicator still flashes.