Atag FR3011A User Manual

1Instructions for useGBFryerFR3011A20325 88-7242 Rev. 1-203Postbus 1033. 6920 BA Duiven. Nederland

10The appliance can be installed in any type of kitchen work surface that is 28 - 40 mm thick.FasteningUnscrew the clamps until they are open sufficie

2Contents PageImportant Information ... 3Operation ...

3Important InformationService and any repairs should be carried out by a service organisation approved by the supplier. Only parts supplied by the org

4InstallationElectric installation must be performed by a certified electrician. Work done by non-specialists may cause injury to people or damage the

5Operating the deep-fryerThe temperature can be set with continuous variability using the deep-fryer control knob.Amount of oil or greaseThere must al

6Care and CleaningThe heating element must be cleaned with a stiff brush.The deep-fryer pan can be cleaned with hot water and a little dish detergent.

7The safety plate is removed for draining oil by pushing it to the side and pulling down. Then the tap can be turned to the vertical position for drai

8Element voltage230VElectrical connection230V single phase positive, negative + earthTotal capacity2000WThis appliance comes with the -mark, whic

9Mounting and RemovingFastening PlatesThe appliance can be placed in a 270 x 490 mm opening in a kitchen work surface. If there is not enough room for