Atag VA5511ATUU/A03 User Manual download pdf (Page 25)

Starting a dishwashing cycle

1. Check that the spray arms can turn freely.

2. Turn the water tap on fully.

3. Press the ON/OFF button.

4. Select the desired programme.

The programme indicator will illuminate.

5. Close the door. The wash programme will begin.

Interrupting or aborting a dishwashing cycle

Only interrupt a dishwashing cycle that is in progress if it is absolutely

necessary.

Interrupting the dishwashing programme by opening the dishwash-

er door

1 Hot steam may escape when the door is opened. There is a risk of scald-

ing.

1. Open the door carefully. The dishwashing cycle will stop.

2. Close the door. The cycle will continue.

Aborting the dishwashing cycle

1. Press function buttons 2 and 3 and keep them pressed.

Two lines are displayed in the multi-display.

2. Release the function buttons. The dishwashing cycle has been can-

celled.

3. If you want to start a new cycle, check whether there is any detergent

in the dispenser.

Setting the Delay Timer

3 With the delay timer you can delay the start of a dishwashing cycle for

between 1 and 19 hours.

1. Press the Delay Timer button repeatedly until the multi-display shows

the desired time delay, for example, 12h, if the cycle is to start in

12 hours. The Delay Timer indicator is lit.

2. Select dishwashing cycle.

3. The time remaining until the start of the cycle is continuously displayed

(e. g., 12h, 11h, 10h, … 1h etc.).

4. Close the door.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 47 48

No comments

Atag VA5511ATUU/A03 User Manual Page 25